Loewe Individual 55 Manual page 122

n
Individual 40-55
User guide
System settings
Connections
Setting the HiFi/AV amplifier
Sound playback via ... - HiFi/AV amplifier
The sound components wizard permits configuration of different
audio amplifiers (stereo amplifiers, surround amplifiers, analogue or
digital) with different digital audio formats (Dolby Digital, dts, MPEG,
and stereo/PCM). See the user guide of the audio amplifier for more
information.
For information on navigation within the wizard refer
to General information on menu operation on
page 18.
How to connect an HiFi/AV amplifier you find starting
from page 131.
HOME: Call Home view.
3456 Mark System settings,
OK call System settings.
5 6 Select Connections,
4 go to next column.
5 6 Select Sound components,
4 Call sound components wizard.
Sound
reproduction
... ... Sound com-
ponents
via ...
65 M ark HiFi/AV amplifier or HiFi/AV amplifier or
TV speakers (switchable).
HiFi/AV Select setting when an amplifier is connected and
amplifier the TV speakers are not used.
HiFi/AV Select setting when an amplifier is connected and
amplifier or the TV speakers are used. In the sound mode selec-
TV speakers tion the audio reproduction can then be switched
(switchable) between the amplifier and the TV speakers.
Conclude this step (for navigation refer to page 18).
Type of sound
transmission
... Sound com-
ponents
34 Select whether the sound is to be transmitted
digitally or analogue to the the amplifier (see right
hand column):
digital: Proceed to Sound formats.
analogue: proceed to Type of amplifier.
SOUND COMPONENTS WIZARD - Sound playback via ... SOUND COMPONENTS WIZARD - Sound playback via ...
Please specify here via which sound components you want to listen to your TV
sound. If you select a "Speaker system", this must be connected to the DIGITAL
AUDIO LINK socket on the back of the TV set (with an additional adapter if
necessary).
Note: The newly selected parameter must be confirmed with the button.
OK
TV speakers
Speaker system
HiFi/AV amplifier
Soundprojector
HiFi/AV amplifier or TV speakers (switchable)
Soundprojector or TV speakers (switchable)
Proceed with Cancel with
Type of sound transmission Type of sound transmission
Please select whether the TV sound signal should be transmitted to the HiFi/AV
amplifier by a digital (via the SPDIF OUT) or analog (via the AUDIO OUT) signal.
digital analogue
Back with Proceed with
- 122 -
Sound
formats
... Sound com-
ponents
6 5 S elect sound formats which can be decoded with
the digital amplifier (see operating manual of the
used amplifier).
OK adopt sound formats.
Conclude this step (for navigation refer to page 18).
Amplifier
Type
... Sound com-
ponents
3 4 P lease select the amplifier type which is connect-
ed (surround or stereo amplifier).
Conclude this step (for navigation refer to page 18).
TV
loudspeakers
... Sound com-
ponents
as centre
speaker
If surround was selected for type of amplifier:
For every connected surround amplifier, select whether
the TV loudspeakers are to be used as centre speakers.
If yes, establish a connection between the centre
output of the amplifier and the CENTER IN socket of
the TV set via a cinch cable.
Attention: Do not use the centre speaker con-
nection of the amplifier, use the centre pre-amp
output instead!
8 End of wizard.
Sound formats Sound formats
Please specify, what kind of sound formats can be processed by your HiFi/AV
amplifier and mark them by the button .
OK
Stereo (PCM) Stereo (PCM)
dts
MPEG
Dolby Digital
Back with Proceed with
Amplifier Type Amplifier Type
Please specify which amplifier type is connected.
Surround amplifier Stereo amplifier
Back with Proceed with
TV loudspeakers as centre speaker TV loudspeakers as centre speaker
Please specify whether you want to use your built-in TV speakers as active centre
speakers of your multi-channel speaker system. If so, connect the centre output
(pre-amplifier output, not speaker output) of the HiFi/AV amplifier to the
CENTER IN socket.
No yes
Back with Finish wizard with