Loewe Individual 55 Manual page 22

n
Individual 40-55
User guide
Initial installation
Selecting
antennas
Your TV set searches for and stores all stations automatically. State which antenna cables are
available for your TV set and connect these to the corresponding antenna sockets which are
specified here in the right hand column.
Back with
56Select antenna cable.
OK Connect/disconnect antenna cable.
Ahead of each selected antenna, the symbol
appears.
Cable (analogue): analogue stations via cable
DVB-T:
DVB-C:
DVB-S (cable 1):
DVB-S (cable 2):
Conclude this step (for navigation refer to page 18).
Subtitle and
Subtitle and audio languages (DVB)
audio
You can preset the desired languages and reserve languages for subtitles and audio for DVB
programmes here.
languages
Note: The newly selected parameter in each case must be confirmed with the
(DVB only)
Subtitle (DVB)
Favoured language
Back with
5634 Select desired languages and alternative
Conclude this step (for navigation refer to page 18).
Extent of
station search
56 Considering the plugged CA module(s) specify
which stations should be searched automatically.
If the CA module(s) do(es) not support this func-
tion or if no CA module is plugged in, this step will
be skipped.
Conclude this step (for navigation refer to page 18).
Depending on the antennas (analogue cable, DVB-T,
DVB-C, DVB-S) selected, the appropriate settings
appear below.
Connect antenna cable(s)
Antenna cable(s) for: to antenna socket(s):
Cable analog ANT TV
DVB-T ANT TV
DVB-C ANT TV
DVB-S (cable 1) ANT SAT
DVB-S (cable 2) ANT SAT2
Proceed with
digital terrestrial stations
digital stations via cable
digital stations via satellite
digital stations via satellite
Audio (DVB) Audio commentary
Alternatvie language
German Greek Swedish Lithuanian
English Polish Danish Estonian
French Hungarian Portuguese Ukrainian
Italian Finnish Russian Romanian
Spanish Slovenian Norwegian Byelorussian
Dutch Slovak Chinese Serbian
Czech Turkish Latvian Croatian
Proceed with
languages for subtitles and audio for DVB
programmes (see page 100).
Set up audio commentary for the visually
impaired (see page 106).
Extent of station search
The CA module "name module" provides a special station list "name list".
Taking this into consideration, specify which stations are to be searched
automatically and mark at least one of the two items below with
OK
All receivable stations excluding stations in the special station list
Stations in the special station list "name list"
Back with Proceed with
- 22 -
Setting options for reception via analogue cable:
If you have not selected Cable analog in the list of available antennas:
Proceed to Setting options for DVB-T reception on page 23.
The selection of a Colour standard is only required when the Location
of TV set Other country was selected (see page 21). Otherwise,
the country-specific default settings will be preset when selecting
the Location of TV set. This step will be skipped then.
TV/col.
standard
button.
OK
.
TV/col. standard
Please select the TV/colour standard.
Automatic BG+L SECAM-BG
PAL-BG SECAM-DK
PAL-DK SECAM-L
PAL-I NTSC
Back with Proceed with
5634 Select appropriate colour standard.
Conclude this step (for navigation refer to page 18).