Loewe Individual 55 Manual page 137

n
Individual 40-55
User guide
Loewe Apps
Overview of the prerequisites for the use of the Assist Media
app for the Apple iPad
1. WLAN router and home network
A WLAN router must be connected and installed.
See page 14 for further information.
2. The Loewe TV set is connected to the home network via LAN
/ WLAN
Your reach the network setting of the Loewe TV set
via HOME view → System settings → Multimedia
/ Network → Network settings → Networking.
... ...
Networking
Select whether the TV device should be connected to
the Internet using a LAN (cable) or WLAN (wireless)
connection. Here you also see the name of the network
and the IP address of the TV set. This address will be
indicated in the Assist Media App (Settings → Con-
nect) and is used to make a difference between the
devices registered in the network.
Further information you find starting from page 114.
3. A digital Cable / Satellite connection (DVB-C/-S) is available
Loewe recommend a DVB-C- or DVB-S connection of
your TV set. You have the possibility to fully use the
Assist Media App for iPad. In case of analogue TV
reception, Assist Media cannot fully use the EPG,
for instance.
4. The DR+ Streaming settings are checked
Please set in the DR+ Streaming settings under
HOME → System settings → Control → more ... →
DR+ → DR+ Streaming the first two items Share
DR+ archive with other devices and Also use other
archives to yes.
...
DR+
Streaming
In the DR+ Streaming setting you can also set the
name of the TV set under which it will be displayed in
the App. After renaming please switch the TV set off
and on again using the power switch.
Further information you find starting from page 107.
NETWORKING WIZARD - Network status
Current settings:
Networking . Wired
IP configuration Automatic
Additional information:
IP address 172.16.10.201
Subnet mask 255.255.0.0
Gateway 172.16.0.1
DNS server 1 172.16.0.1
DNS server 2 192.168.1.1
MAC address 00:09:82:17:73:52
Change settings with Cancel with
If you select "yes" here, you will make the DR+ archive of your TV set
Share DR+ ar-
available to any other TV sets and UPnP clients equipped with this
feature. They will then be able to access the archive over your home
network.
DR+ device
name
DR+ device
group name
IP port
number
DR+ standby
- 137 -
5. Creating an Apple ID
If it has not been done yet, create a user account (Apple
ID) on your iPad in the Settings under item iTunes &
App Stores.
Follow the instructions.
You can then download the Loewe Assist Media App
for iPad from the App Store.