Loewe Individual 55 Manual page 24

n
Individual 40-55
User guide
Initial installation
Setting options for DVB-C reception:
If you have not selected DVB-C antenna in the list of available antennas:
Proceed to Setting options for DVB-S reception (see page 25).
If a CA module is plugged in during Initial installation and if Stations
in the special station list was selected in Extent of station
search (see page 22), the routine continues with the step Set-
ting options for DVB-S reception (see page 25).
Network
selection
Please state from which network you wish to receive your station.
Unitymedia
other network
Back with
If several networks are available via DVB-C, you can
decide which network you want to receive your chan-
nels from. The normal DVB-C settings are derived from
the selection of the location or network and do not
need to be changed. Exactly which of the following
settings are present is dependent on which network is
selected.
56 Select network.
Conclude this step (for navigation refer to page 18).
Settings
Please specify whether you want to search for scrambled stations too.
Note: Scrambled stations can only be received with an integrated CA module and additional
card.
Note: The newly selected parameter in each case must be confirmed with the
Scrambled stations
Accept Logical Channel Number
Back with
5634 Select and adapt settings for DVB-C recep-
OK Adopt settings.
Network selection
Proceed with
DVB-C settings
no yes
Network search Frequency search
044.00 MHz
none 00000
no yes
Proceed with
tion.
- 24 -
Scrambled
stations
Search
method
Start
frequency
Network ID If you select none here, DVB signals of all current
Accept
Logical
Channel
Number
button.
OK
You can state whether coded stations are to be
searched for in the search/update.
save all found scrambled stations. However, these
stations can only be received in connection with a CA
module and the appropriate Smart Card.
the CA module is described on page 82.
If you select Frequency search here, a search is
performed for all receivable stations. With Network
search, only the stations which the networks supply
are searched - either for all receivable networks
or only for the particular network specified under
Network ID.
The DVB stations are only searched for in the fre-
quency range above the start frequency.
transmitter networks are searched automatically
(recommended for most cable networks).
If, on the other hand, you specify a certain network ID
(necessary in the cable networks of some countries),
only DVB signals of this broadcasting network are
searched for automatically.
Your cable provider has the information you need.
In various countries, digital stations (DVB-C) are
transmitted with a preset channel number per
station, known as Logical Channel Numbers (LCN).
If you select yes here, these default channel slots
will be used and the channels of the preferred signal
source will be sorted as per LCN. The stations in the
station list can no longer be shifted (see Move block
/ Change order on page 96).
Conclude this step (for navigation refer to page 18).
Select yes to
Handling of