Loewe Individual 55 Manual page 28

Table of Contents

Advertisement

n
Individual 40-55
User guide
Initial installation
Setting options for the satellite system
(DiSEqC one cable communal system):
Number of
system
channel used
Number of system channel used
Do you wish to use one or two transmission channels in your single cable communal
installation? With two channels - provided they are available to you from the installation - it
is possible to watch different stations at the same time in the main screen and in the PIP.
One channel
Retour avec
34 Select One channel or Two channels.
Here you specify if you use one or two transmis-
sion channels in your one cable communal
system.
In case of two channels - as far as they are avail-
able in your system - different stations can be
simultaneously viewed on the main picture and
on PIP.
You get more information on your system from
your dealer.
Conclude this step (for navigation refer to page 18).
DiSEqC
one cable
communal
installation
Please enter here which DiSEqC single cable system you are using. The following setting
parameters of your system are then adapted accordingly.
Back with
5634 Select DiSEqC single cable communal instal-
lation.
OK Adopt settings.
Conclude this step (for navigation refer to page 18).
Satellite
selection
Please specify here which satellite you receive.
5634 Select satellites from list,
Conclude this step (for navigation refer to page 18)
Two channels
Continuer avec
Select DiSEqC single cable communal installation
User defined
DELTA SUM-918
KATHREIN EXR-501
DELTA SUM-514
DELTA SUM-928
KATHREIN EXR-551
DELTA SUM-516
DELTA MSU-50x
KATHREIN EXR-552
DELTA SUM-518
DELTA MSU-90x/170x
KATHREIN EXR-154
Proceed with
Select satellites
None
ASTRA1 19,2°E
Intelsat10-02 1°W
Türksat 42°E
Eutelsat W2 16°E
Atlantic Bird3 5°W
Hellas Sat2 39°E
Hot Bird 13°E
Telecom2C 5°W
Eutelsat W4 36°E
Eurobird 9A 9°E
Nilesat 7°W
Eurobird1 28,5°E
Eutelsat W3A 7°E
Atlantic Bird2 8°W
ASTRA2 28,2°E
Sirius2/3 5°E
Telecom2D 8°E
ASTRA3 23,5°E
Thor2/3 0,8°W
Atlantic Bird1 12,5°W
Back with
Proceed with
- 28 -
LNB
.
frequencies
5634 Set LNB frequencies.
OK Adopt settings.
Conclude this step (for navigation refer to page 18).
Manual
registration
(for socket
ANT SAT)
5634 Select and adjust settings for the DiSEqC
OK Adopt settings.
Transmission
Select the desired transmission channel.
channel
Transmission
Select the corresponding transmission frequency.
frequency
PIN protection If your system is designed for it, it is possible to pro-
tect your used transmission data from use by other
subscribers with a PIN.
Define/
Here you can determine and change the PIN for
change PIN
PIN protection. Only possible, when yes has been
selected for PIN protection.
Conclude this step (for navigation refer to page 18).
(Proceed with Setting options for DVB-S reception
(continued) on page 30).
LNB frequencies
ASTRA1 19,2°E Low Band
5150 MHz
9750 MHz
10000 MHz
ASTRA1 19,2°E High Band
10600 MHz
10750 MHz
11000 MHz
Back with
Proceed with
Normally, you do not need to change the
values unless the LNC (LNB) of your satellite
system uses a different oscillator frequency
(important for the frequency display).
Manual registration (for socket ANT SAT)
Back with
Proceed with
single cable communal installation.
OK
10200 MHz
11250 MHz
OK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Individual 46Individual 40

Table of Contents