Troubleshooting Guide - Nortel 3050 Troubleshooting Manual

26 Troubleshooting authentication tasks
Configuring RADIUS settings
This section explains the steps to configure the different RADIUS settings.
Procedure steps
Step
1
2
3
Variable
authorder
name
secret
Copyright © 2007 Nortel Networks
.
Action
Enter the following command to add a RADIUS server
name. /cfg/vpn 1/aaa/auth 2/type radius/name
"radius.nortel.se"
Enter the following command to add multiple servers.
/cfg/vpn 1/aaa/auth 2/radius/servers/add
172.25.3.50 1812 secret
Enter the following command to add the authentication order of
the SSL VPN Gateway.
/cfg/vpn 1/aaa/authorder 2,1
Use the data in the following table to help you enable
configure the parameters in this command.
Definition
Specifies the auth order of the SSL VP N
gateway to authenticate a user.
Specifies the name of the RADIUS sever.
Specifies the shared RADIUS secret used in the
communication between the RADIUS client and
server.
Nortel VPN Gateway

Troubleshooting Guide

NN46120-700 01.01 Standard
12 October 2007
--End--
ATTENTION
With this option the SSL VPN gateway will
first try the RADIUS server, in case the user is
not authenticated or the server timeout limit is
reached, the SSL VPN gateway will check the
Local user database.
ATTENTION
The name option is only internal in the
box/cluster it will not show up in the Login
Service drop-down box as in previous version.