Displaying The Audit Trials; Viewing Ssl Traffic Generators; Viewing Tcp Traffic Generators - Nortel 3050 Troubleshooting Manual

14 Global troubleshooting tasks
8

Displaying the audit trials

Use this tool to view changes in the system. The audit trial must be used
in conjunction with the system.
Procedure steps
Step
1
2
3
Following are the tips to implement SSL acceleration.
•
•

Viewing SSL traffic generators

This section explains the step to view SSL traffic generators.
Procedure steps

Viewing TCP traffic generators

This section explains the step to view SSL traffic generators.
Procedure steps
Copyright © 2007 Nortel Networks
.
Use the following table to identify the types of log files in a dump.
Action
From the command line, enter this command to add an audit
server to the device.
/cfg/sys/adm/audit/servers/add <IP address>
<udp-port> <shared server password>.
From the command line, enter this command to enable audit
logging.
/cfg/sys/adm/audit/ena.
All configuration changes are sent to the RADIUS.
Make sure your system is configured for SSL acceleration.
Use browsers on the client machines that are capable of doing HTTPS.
Action
From the command line, enter this command to view the SSL
traffic dump.
/cfg/vpn # /server/trace/ssldump
Nortel VPN Gateway
Troubleshooting Guide
NN46120-700 01.01 Standard
12 October 2007
--End--
--End--