Table of Contents
Advertisement
Chapter-5
A Brief Browse of 10 base-T LAN
RTL-8019' s Installation Software
The Boser HS-4010 provides an on board 16-bit ISA 10 base-T
Ethernet LAN interface RJ-45 connection for easy using the HS-4010
486 Little All-in-one L/VGA Industrial Single Board in connection
to-with Novell NE2000 compatible LAN network system.
The HS-4010's design which is basing on RTL 8019 chipset with
provides an RJ-45 10 base-T NE2000 compatible interface. We here
provide some information on the installation for your first reference.
The delivery of the software packages with HS-4010 which including a
easy access help manual by files from. The version of this help manual
is 1.00 on dated Jun.19.1997. Please read all following help manual
first before your installation of this LAN system.
For completed information, please browse at
http:\\www.realtek.com.tw
If you want to select I/O must be Run "rset8019.exe" to configure and
test the adapter, and set the Operating Mode as follow:
set "Operating Mode" to "Jumperless" and set the proper IRQ and I/O.
(Write down the IRQ and I/O address for later use)
set "Operating Mode" to "Plug & Play", and reboot the system. (Run
rset8019.exe again, and write down the IRQ and I/O address for later
use)
Startup the Solaris and log on to Solaris as Superuser(root).
43
Advertisement
Table of Contents
