Regular Output; Fallback Output - Allied Telesis AT-8900 Hardware Reference Manual
Hide thumbs
Also See for AT-8900:
- Quick install manual (13 pages) ,
- Troubleshooting (5 pages) ,
- Release note (232 pages)
Table of Contents
Advertisement
Hardware Reference
Regular output
Fallback output
Software Release 3.0.2
C613-03092-00 REV C
Bootloader and product software (AlliedWare) display a series of messages
similar to those in the following figure during routine startup for the AT-9900s
switch.
------------------------------------------------------------
Bootloader v1-00, built Feb 10 2005
------------------------------------------------------------
Initial RAM test ............................... passed
Available RAM .................................. 512 MB
Relocating the bootloader to execute from RAM .... done
Boot fallback software (Y) ?
Initialising file system access .................. done
Booting preferred base package: AT9924s_301-00.pkg
Installing system.img (1219098 bytes) ............ done
Initiating system software ....................... done
------------------------------------------------------------
AlliedWare v3.0.1-00, built 11 Feb 2005
------------------------------------------------------------
Initialising file system access .................. done
Validating package licence ....................... done
Installing product_apps.img (8925892 bytes) ...... done
IGMP packet trapping has been activated for IGMP snooping
Executing configuration script <startup.cfg>
Switch startup complete
Fallback software is a subset of the base package and runs when the base
package is unavailable. When the switch runs fallback software, a series of
messages similar to those in the following figure are displayed.
.
.
.
Installing system.img (1219098 bytes) ............ done
Initiating system software ....................... done
------------------------------------------------------------
AlliedWare Fallback v3.0.1-00, built
------------------------------------------------------------
WARNING: Fallback software will not allow normal
network operation
Initialising file system access .................. done
Installing product_apps.img (8925892 bytes) ...... done
Executing configuration script <startup.cfg>
Switch startup complete
(bootloader messages)
21
.
.
.
11 Feb 2005
Advertisement
Table of Contents
Troubleshooting
