Allied Telesis AT-8900 Hardware Reference Manual page 27

Hardware Reference
Software Release 3.0.2
C613-03092-00 REV C
Message
ERROR: Failed to extract
product_apps.img from
package to RAM
ERROR: Failed to run
product_apps.img
ERROR: Phase 2 of Software
Manager startup failed -
rebooting to fallback
software
Description (cont)
The product application image could not be extracted from
the package file because the package file is corrupt or there
is not enough RAM.
Manually restart the switch with fallback software (for
details, see "Overrides" on page
base package.
If this error occurs while rebooting from fallback, contact
your authorised distributor or reseller.
The operating system could not execute the product
application image file.
Manually restart the switch with fallback software (for
details, see "Overrides" on page
base package.
If this error occurs while rebooting from fallback, contact
your authorised distributor or reseller.
Software Manager is part of the system software that
controls startup of the product software.The install
information for it is invalid or the installed software is not
licenced. Therefore, the switch boots up from the fallback
software.
25
20), and install another
20), and install another