Allied Telesis AT-8900 Hardware Reference Manual page 18

16
5. From the main HyperTerminal window, select Properties from the File
menu. Click the Settings tab, and set the Properties dialog box as follows.
6. Click ASCII Setup to display the ASCII Setup dialog box, and ensure the
following options are not selected:
• Echo typed characters locally
• Append line feeds to incoming line ends
Set other parameters as necessary and click the OK buttons on both dialog
boxes to close them.
7. Save the current session by selecting Save from the File menu on the main
HyperTerminal window. This creates a connection icon with the name you
assigned in the HyperTerminal group.
To use the configuration, double-click the connection icon. When the
HyperTerminal window appears, press the Enter key several times; the
switch's login prompt is then displayed.
AT-8900, AT-9900, AT-9900s Series Switches
Software Release 3.0.2
C613-03092-00 REV C