Moving The Chassis - H3C CR19000-16 Installation, Quick Start

Moving the chassis

CAUTION:
• To avoid chassis damage, use only the chassis handles other than any other component to
move the chassis.
• During the moving process, keep the router upright and do not put down the router or drag the
router on the ground.
• When transporting, moving, and installing the router, be careful not to bump the router into the
door or wall.
To move the chassis to the installation location:
1. Unpack the chassis.
2. Remove the screws on the L brackets by using a Phillips screwdriver and an adjustable
wrench to separate the router from the pallet.
3. Use a minimum of four people to move the chassis by holding the chassis handles.
Keep the router upright during the moving process.
Figure 2-5 Moving the chassis
2-6