Mounting Brackets, Chassis Rails, And Grounding Cable Installation Positions; Attaching The Mounting Brackets And Chassis Rails To The Chassis - H3C S6850-56HF-CP Manual

Figure2-9 1U super-short slide rail and chassis rail
1
(1) Chassis rail
Mounting brackets, chassis rails, and grounding cable
installation positions
The LS-6850-56HF-CP switch provides two grounding points: primary grounding point (with a
grounding sign) and auxiliary grounding point, as shown in Figure2-10.
Select installation positions for the mounting brackets, chassis rails, and grounding cable as
required.
Figure2-10 Mounting brackets and grounding cable installation positions on the
LS-6850-56HF-CP switch
(1) Primary grounding point
(3) Port-side installation position for the mounting bracket
Attaching the mounting brackets and chassis rails to the
chassis
1. Place the wide flange of the mounting bracket against the chassis side panel. Align the
mounting bracket installation holes with the appropriate screw holes in the chassis. Use the
provided M4 screws to attach the mounting bracket to the chassis.
To install the mounting brackets at the port-side mounting position, see Figure2-11,

Figure2-12, Figure2-13, and Figure2-14.
2
2-6
(2) Super-short slide rail
(2) Auxiliary grounding point