Grounding The Router - H3C CR19000-16 Installation, Quick Start

5

Grounding the router

CAUTION:
Make sure the ground point on the rack is connected reliably to a grounding strip in the equipment
room.
To ground the router:
1. Remove the grounding screws from the grounding point on the chassis.
2. Use the grounding screws to attach the two-hole grounding lug of the grounding cable to
grounding point on the chassis.
3. Connect the ring terminal of the grounding cable to the grounding point on the rack.
Figure 5-1 Grounding the router
5-1