Standard 1.1
9150 BRI Configuration property sheet
This topic provides important information about the BRI Configuration property
sheet. To access this property sheet, go to Configuration Manager
BRI Configuration.
Disabling Multiple Subscriber Number (MSN)
Remote Office requires the ISDN numbers to be unique per module for PSTN
connections between the RLC and Remote Office 9150 unit.
Do not configure B-channels as Local and Remote if MSN is disabled.
For Remote Office 9150 units with multiple BRI modules:
Configure a maximum of one BRI module as Remote Only if PSTN
!
connections are required.
Configure all other BRI modules as Local only.
!
For Remote Office 9150 units with just one BRI module the BRI module can be
configured as Local only or Remote only. If local ISDN calls and remote calls
over PSTN are required, then MSN must be enabled.
Permanent PSTN connection
When using multiple Remote Office units, you must only configure the
permanent PSTN connections for the RLC's primary network ports. If you only
use one Remote Office unit, you can use additional permanent PSTN
connections.
38
1.4.2 Release Notes for Remote Office and RLC
➝
9150
➝