December 2003
Who should read this document
This document is written for individuals who are responsible for the installation,
configuration, and day-to-day management of the Remote Office 9150 unit,
Remote Office 911x series unit, Meridian Digital Telephone IP Adapter unit,
and RLC.
How to achieve a successful implementation
The instructions provided in the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210) and the Remote Office Installation
Testing—Job Aide help you achieve a successful implementation. Specifically,
pay close attention to the instructions for configuring the following:
PBX configuration for ports, DN Discovery, and Caller ID security
!
PSTN numbers used to contact Remote Office units
!
prefix configuration in PSTN numbers on the RLC
!
BRI trunk configuration on the Remote Office 9150 unit
!
Remote Office naming convention
Unless otherwise specified, the term "Remote Office units" refers to the
following products:
Remote Office 9110 unit
!
Remote Office 9115 unit
!
Remote Office 9150 unit
!
Meridian Digital Telephone IP Adapter unit (Internal and External)
!
PBX terminology
Throughout this document, the term "host PBX" refers to any of the following
Nortel Networks PBX platforms:
Meridian 1
!
Meridian SL-100
!
Succession 1000
!
1.4.2 Release Notes for Remote Office and RLC
5