Emerson Rosemount Oxymitter 4000 Reference Manual page 41

Instruction Manual
July 2018
IM-106-340C, Rev. 6.2
Apr 2015
Figure 2-5. Hazardous Area
Figure 2-5. Hazardous Area Oxymitter 4000 Probe Mounting Plate Installation
Oxymitter 4000 Mounting Plate
Installation
INSTALLATION FOR METAL WALL
STACK OR DUCT CONSTRUCTION
Mounting holes
shown rotated 45
o
out of true position
Weld or bolt mounting plate to metal wall
of stack or duct; Joint must be air tight.
Weld or bolt mounting plate to
metal wall of stack or duct.
Joint must be air tight.
Notes: 1.
Dimensions are in millimeters with
inches in parentheses.
2. All masonry stack work and joints except adaptor
plate are not furnished by Emerson Process Management.
Installation
2-7
ABRASIVE SHIELD MOUNTING
13 (0.50)
95 (3.75)
Minimum Dia
Hole in Wall
Stack or Duct
Metal Wall
PROBE MOUNTING
82.5 (3.25)
Minimum Dia
Hole in Wall
Stack or Duct
Metal Wall
Hazardous Area Oxymitter 4000
INSTALLATION FOR MASONRY
WALL STACK CONSTRUCTION
Bolt Mounting Plate to
Outside Wall Surface
Field Weld Pipe
to Mounting Plate
Mounting Holes
o
Shown Rotated 45
out of True Position
Joint Must
be Air Tight
Outside Wall
Surface
Bolt Mounting Plate to
Outside Wall Surface
Joint Must
be Air Tight
Outside Wall
Surface
Rosemount Oxymitter 4000
13 (0.50)
114 (4.50)
O.D. Ref
Pipe 4.00 in. Sched 40 Pipe
Sleeve (Not by Emerson
Process Management)
length by Customer
Masonry
stack wall
Field weld pipe
to Mounting Plate
102 (4.0)
O.D. Ref
Pipe 3.5 in. Sched 40 Pipe
Sleeve (Not by Emerson
Process Management)
length by Customer
Masonry
stack wall
41