Table of Contents
Advertisement
®
®
FRED
easyport
plus
User Guide
2.3
Operating and Display Elements
2.3.1
Overview FRED easyport plus
The picture below shows the user interface for an AED with ECG and CPR feedback
display.
3
2
1
12
11
Fig. 2.1
Operating Elements
(1) Green button to switch the device on/off and RTU LED (Ready -to-use LED)
(2) Orange indicator lamp; lit as long as no electrodes are connected
(3) Electrode connector
(4) LCD screen
(5) Switching to child mode when using adult electrodes (PATIENT button)
(6) USB connector for Argus LifePoint sensor or USB memory stick
(7) Orange button: key to trigger a defibrillation impulse (SHOCK button)
(8) Battery at back
(9) Loudspeaker
(10) Microphone
(11) Data transfer (COM) button
(12) Ambient light sensor
To ensure patient safety
– only use original SCHILLER electrodes (3)
– connect only the LifePoint sensor to the USB port (6)
– connect only USB memory stick to USB port (6), when device is not in use.
Components and Operation
Operating and Display Elements
4
CPR
Depth
5.0
cm
CPR OK
00:59
Rate
101
/min
30 CHEST COMPRESSIONS
THEN 2 RESCUE BREATHS
9
10
2
2.3
5
6
7
8
Page 19
Advertisement
Table of Contents
