Table of Contents
Advertisement
3.8
Footplate angle
Adjust the angle of the footplate at its toothed clamp:
1. Loosen the socket screw (28) of the footrest (29).
5. Turn the footplate to the desired angle (80°- 100°). The dashes (30) on the toothed clamp
indicate the angular positions.
6. Retighten the socket screw.
7. Repeat this for the second footplate.
3.9
Arm pad height and depth (option 1)
This arm pad is adjustable in height and depth, each in 3 positions. The height is adjusted by
adding or removing distance blocks. The depth is adjusted by using different mounting holes.
To adjust:
1. Remove both socket screws (34).
2. Place the correct number of blocks below and above the frame tubes, see table 1.
3. For depth adjustment, install the arm pad by using the correct mounting holes, see table 2.
Table 1
Height arm pad to seat
220 mm (Default)
230 mm
240 mm
Table 2
Depth of the arm pad
Front position
Middle position (Standard)
Back position
Number of blocks
below tube
2
1
0
Used holes
Back and middle
Hole 2 and 4
Front and middle
34
Installation manual
- 15 -
V-series wheelchairs
Number of blocks
between tube and arm pad
1
2
3
EN
2023-02
Adjustments
NL
Advertisement
Table of Contents
