EN
NL
3.6.1 Stepless adjustment
Adjust the length as follows:
1. Remove the socket screw (26) at the back
of the footrest.
2. Adjust the footrest to a comfortable length.
3. Retighten the socket screw firmly.
4. Repeat this for the second footrest. Make
sure
the
identically.
3.6.2 Adjustment in steps
Adjust the length as follows (3 holes on inside tube, 3 holes on
outside tube ; 120mm range):
1. Remove the screw (27).
2. Adjust the footrest to a comfortable length.
3. Retighten the screw firmly.
4. Repeat this for the second footrest. Make sure the footrests are
positioned identically.
3.7
Footplate position
The footplate(s) can be used in 2 positions: front and rear.
By default, each footplate is adjusted with its base plate in
the rear position.
To place the footplate in front position:
1. Remove the socket screws (28) of both footplates.
2. Exchange left and right footplate.
3. Tighten the socket screws (28) firmly.
footrests
are
positioned
V300 – V500
V500 Light - V500 Light 30° - V500 Active
Installation manual
- 14 -
V-series wheelchairs
26
V300 XL
29
28
30
2023-02
Adjustments
26
27