Huawei UPS5000-H-600 kVA-FTN Quick Manual page 66

UPS5000-H-600 kVA-FTN
Quick Guide (Singapore, 100 kVA Power Modules)
Figure 2-2 Settings Wizard
(1) Lead-acid battery scenario
Step 3 After you set parameters on the Settings Wizard screen, the system displays the
Bypass mode and No battery alarms, which do not need to be handled. Other
alarms need to be handled.
Issue 01 (2022-11-18)
NO TE
● Set the time and date correctly. Incorrect time and date will cause false fault analysis
during maintenance or repair, affecting the normal operation.
● After network parameters are set, connect the UPS to the network, ensuring that
maintenance personnel can manage or control the UPS remotely. If you do not need
remote management, retain the default network parameter settings.
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Single UPS Commissioning
(2) Lithium battery scenario
60