Advertisement
Basic safety instructions
6
2.4
Product safety
This product is designed in accordance with good engineering practice to meet state-of-
the-art safety requirements and has been tested and left the factory in a condition in
which it is safe to operate.
2.5
IT security
Our warranty is valid only if the product is installed and used as described in the Operating
Instructions. The product is equipped with security mechanisms to protect it against any
inadvertent changes to the settings.
IT security measures, which provide additional protection for the product and associated
data transfer, must be implemented by the operators themselves in line with their security
standards.
2.6
Device-specific IT security
The device offers specific functions to support protective measures by the operator. These
functions can be configured by the user and guarantee greater in-operation safety if used
correctly. The device provides a password for changing the user role (applies to operation
via FieldCare, DeviceCare, PDM).
Function/interface
Factory setting
Password
Not enabled (0000)
Service interface (CDI)
Enabled
2.6.1
User-specific password
Write access to the device parameters via the operating tool (e.g. FieldCare, DeviceCare)
can be protected by a modifiable, user-specific password.
2.6.2
General information
• During commissioning, any passwords that were used at delivery should be changed.
• Follow the general rules for generating a secure password when defining and managing
the password.
• The user is responsible for the management and careful handling of passwords.
Recommendation
Assign a customized access code during commissioning.
On an individual basis following risk assessment.
iTEMP TMT182B
Endress+Hauser
Advertisement
