iTEMP TMT182B
Endress+Hauser
1. Make sure that the DTM library is updated for all the connected devices.
2. Start DeviceCare and connect the device via the Automatic button.
The device is detected automatically.
When transmitting the device parameters following offline parameter configuration,
the password for Maintenance must first be entered in the System -> User
administration menu, if specified.
User interface
1
8
DeviceCare user interface with device information
1
Navigation area
2
Displays device name, current status, current measured values
3
Device parameter configuration section
6.3.2
FieldCare
Function scope
FDT/DTM-based plant asset management tool from Endress+Hauser. It can configure all
smart field units in a system and helps you manage them. By using the status information,
it is also a simple but effective way of checking their status and condition. Access is via the
HART
®
protocol, CDI (= Endress+Hauser Common Data Interface). It supports devices with
the following protocols, provided a suitable device driver (DTM) is installed: HART,
PROFIBUS, FOUNDATION Fieldbus, Ethernet/IP, Modbus, CDI, ISS, IPC and PCP.
Typical functions:
• Parameterization of transmitters
• Loading and saving of device data (upload/download)
• Documentation of the measuring point
• Visualization of the measured value memory (line recorder) and event logbook
For details, see Operating Instructions BA027S/04/xx and BA059AS/04/xx
Source for device description files
See information → 22
Operation options
2
3
A0048375
19