Troubleshooting - Jimmy H8 Flex Instruction Manual

Hide thumbs Also See for H8 Flex:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 35
Discarded machine contains batteries. They should be recycled safely. Do not discard them
randomly.
If there is damage on power cord, to avoid danger, it should be replaced or repaired by
manufacturer、repairing agency or professional person.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved.
The appliance is only to be used with the power supply unit provided.
Trouble Shooting
Please check the following issues before sending to designated repair agent.
Trouble
Motor does not
work
Suction drops
Short working time
after charging
Dust content
indicator is always
red
When there is electric components defect,which needs professional after service person for instruction or repairing,
LED screen will display the defect warning with error code of F1 to F8. Please contact after service of local agent
and provide error code.
Possible Causes
Battery has no power
Metal tube,floorhead, battery
pack and vaccum cleaner is not
assembled correctly
Dust cup full
Filter blocked
Floorhead air path blocked
Machine not fully charged
Battery old aging
Dust sensor covered by dust
Solutions
Charge the vacuum cleaner
Check the accessories are
assembled correctly to the vacuum
cleaner
Clean dust cup
Clean or replace filter
Clean floorhead air path
Follow instruction manual to fully
charge the battery
New batteries can be bought from
local distributor
Clean the dust on the dust sensor
which is located in the suction inlet
of the handheld vacuum cleaner
43

Advertisement

Table of Contents
loading

Table of Contents