Use Of Accessories - Jimmy H8 Flex Instruction Manual

Hide thumbs Also See for H8 Flex:

Instruction manual (33 pages)

Table Of Contents

Table of Contents

Available languages

When product works in Max mode and battery power drops below 20%, to extend product run time,

product will automatically switch from Max to Eco mode. After battery is charged to higher than 20%

power, product can work in Max mode.

When the product is working in Auto mode, it will adjust working power basing on the dust content and

the floor type it detects, in order to achieve higher cleaning efficiency. Under Auto mode, LED screen

display Auto regardless how high the working power is.

The product is equipped with dust content sensor. On LED screen bottom there is a light strip to

display the dust content. As dust content decreases

from high to low, the red colour decreases and blue

colour increases. When the strip is completely blue,

the cleaning surface is clean. Cleanness of the

cleaning surface can be visually displayed through

LED screen.

Use of flexible metal tube

The flexible metal tube has two modes: vertical

and bending. The vertical mode is equivalent to the

normal metal tube. The bending mode can be used

for cleaning under the table bottom, bed bottom,

etc. When the bending mode is needed, press the

bending button as shown in the g picture, and the

metal tube can achieve 0-90°bending angle.

Use of electric floor head

Electric floor head is suitable to clean all kinds of floor

like hard floor, tile and carpet etc. Product comes with

an extra carpet brushroll can be replaced to the floor

head to deep clean carpet.

Attention: During the operation of the electric floor head,

if there is a large volume of foreign matter inhaled or

too much fiber wound, or even a child in the play of the

machine mistakenly put his hand into the nozzle, resulting

in the brushroll abnormal stop, the electric floor head

will stop working, in order to protect personal safety and

brush motor.