Charging Of Vacuum Cleaner - Jimmy H8 Flex Instruction Manual

Use of Vacuum
Charging
Attention: When use the product for first time, battery
power is not full. Need to charge the vacuum before
using.

Charging of vacuum cleaner

When the vacuum cleaner power is insufficient,
charge the vacuum cleaner in time ; When the voltage
is too low, to protect the battery, vacuum cleaner
will be automatic power-off, at this time the vacuum
cleaner need to be charged. When charging, plug the
charger connector into the A/C power socket, hang
the handheld vacuum cleaner on the holder to start
charging. When the handheld vacuum cleaner LED
display shows an increase in power, it indicates that
the vacuum cleaner is charging. When charging is
completed, LED display show 100% power.
If battery pack is charged separately without being
assembled on machine, during charging, indicator in
battery pack is red and turns green after charging is
completed.
Attention:
1. When battery power is below ≤20%, if product is working
in Max mode , it will change to Eco mode automatically.
When battery power runs off, product will turn off
automatically.
2. Attention: If vacuum cleaner is long idled, charge the
battery every three months to avoid battery failure.
3. After charging, please pull the charger plug off power
socket and stop charging.
4. Attention: if power cord is damaged, to avoid danger, it
must be replaced by professional staff of the manufacturer,
repairing agent or similar department.
Use of handheld vacuum and LED screen contents
Take the vacuum cleaner off the storage holder, press the on/off button to start or stop the vacuum
cleaner. Mode button can adjust working mode. When machine is turned on, it works in Auto mode,
press the mode button to switch to the sequence of Turbo- Max - Eco-Auto mode. During mode switch
the mode will be displayed in LED screen.
Middle of LED screen displays product run time left in current mode. When mode is changed, left run
time will also change accordingly.
38
5
6
On/off button
Battery pack
release button
7
min
Eco
min
Turbo
Mode button
LED screen
Dust release
button
min
Auto
min
Max