Troubleshooting - Jimmy BX7 Pro User Manual

Trouble Shooting
Please check the following trouble points before go to the maintenance department.
Problems
Power failure
Low suction
power
UV light failure
Automatically
turned off
Brushroll
failure
Note:If fault remains after adopting the following solutions, contact after sale service or local
distributor immediately.
Possible Reasons
Power cord is not firmly inserted.
No power on socket.
Power switch not pressed.
Suction port clogged.
Dust accumulation on filter.
Dust accumulation on cyclone.
The UV function is automatically
off for safety reasons or weak
reflec-tion of object.
The machine operates on the
same position for a long time.
The machine is placed upright.
Sensor window is contaminate.
UV light damage.
Dust cup full.
Suction port clogged.
Filter blocked.
Brushroll tangled with foreign
matter.
Belt broken.
Solution
Insert the power cord firmly.
Check the socket.
Press the On/Off button.
Clean up suction port.
Clean up the dust cup and filter.
Clean up cyclone.
The UV function operates on
the condition of less than 3CM
height from the object.
Move the machine forward
and backward
Machine tilted no more than 30
de-grees.
Clean the sensor window with
a half-dry cloth.
Contact after-sale service.
The machine will automatically turn
off to prevent the motor under long
operation. If the machine automat-
ically turned off , please clean up
the dust cup and filter, unplug pow-
er cord and reuse if after 2 hours.
Remove the cover and clean up
brushroll according to user guide.
Remove the cover according to
user guide and check the belt. If
broken, contact after-sale to repair.
22