Jimmy H8 Flex Instruction Manual page 37

Assemble the floor head with metal tube
assembly and handheld vacuum cleaner: as
shown in the picture, align the conductive
needle of the metal tube with the coupler of the
suction nozzle, push up until a "click" sound is
heard.
Charging holder assembly
Assebmle accessory holders to the holer, then
fasten accessory holders with screw. Put the
vacuum cleaner in the holder, and lean the
vacuum cleaner against the wall, place the
holder in the position that vacuum cleaner
floor head does not touch gro und. Take off the
handheld vacuum cleaner, place expansion
pipe on the wall and place the holder to the
expansion pipe position, then lock in the screw.
After assembly completed, put the vacuum to
charger holder to charge or store. (Attention: Do
not fix the holder to bathroom or other humid
wall.)
Assembly of accessories
For the convenience of use, this product is specially equipped with some accessories for the
hand-held part of the vacuum cleaner. When you use the handheld vacuum cleaner alone,
you can directly connect the accessories according to your needs or connect the accessories
through the stretch hose.
Name
Electric mattress brush
Upholstery tool
Crevice tool
Soft brush
Stretch hose
Connector
36
model
4-1
Accessory
holder
right
Accessory
holder left
①
4-2
Screw
Accessory
holder
③
H8 Flex
Expansion
pipe
②
④