Cleaning And Replacing Parts - Jimmy H8 Flex Instruction Manual

Stretch hose: suitable for connecting with other
tools to clean hard to reach areas.
Electric mattress head: Suitable for sofa and
bed mattress. The brushroll beats out and then
cleans the dust mite and allergen from deep sofa
or bed.
Connector: Can be connected to other tools and
bend to different angle to clean dust on top of
high cabinets or dust on the roof.

Cleaning and Replacing Parts

Attention:
1. HEPA filter is available for sale from local vacuum
cleaner distributors.
2. It is recommended to clean the dust cup after
each use; When the dust cup is full or the HEPA filter
is clogged, it needs to be cleaned and replaced if
necessary.
3. Electric floor head brushroll might be entangled with
hair after long time use. It needs to be cleaned in time to
keep the vacuum working more efficiently.
Clean dust cup and filtration system
When dust cup is full or HEPA is clogged, LED
screen will display HEPA icon as the picture to
remind to clean dust cup and filter. Please clean
dust cup and HEPA filer in time. Replace HEPA
filter if necessary.
Steps of cleaning dust cup and filtration system:
1. Press down the dust cup bottom cover, open
dust cup and dump dust into trash can.
2. Hold HEPA lid and rotate anti-clockwise,
remove HEPA assembly from handheld vacuum
for cleaning.
3. Hold top of cyclone assembly and rotate
anti-clockwise, remove cyclone assembly from
handheld vacuum for cleaning.
4. If HEPA needs wash, hold the HEPA and
rotate clockwise, remove it from HEPA lid for
washing. HEPA needs completely dry before
reuse.
5. After cleaning, assemble the parts back in the
opposite sequence of disassembly.
40
11
12
Eco
13
①
14
min
②
③