Product Assembly - Jimmy H8 Flex Instruction Manual

Packing List
Handheld
Name
Vacuum Cleaner
Amount
Name Soft brush
Amount
Name Charger
Amount

Product Assembly

Assemble electric floor head with
metal tube
Hold the floor head with left hand, use right hand
to insert the metal tube vertically into floor head,
align with the conductive needle, press the tube
until a "click" sound is heard.
Attention:Keep the handle and floor head in the same
direction, conductive needle shall align with the socket.
When packing, storing or cleaning, if the electric
floor head needs to be removed, press the
brush release button as shown in the picture
and pull the electric floor head in the direction
shown in the picture.
Assemble the battery pack and
handheld vacuum cleaner
Assembly of battery pack: hold the hand-held
vacuum cleaner in one hand, hold the battery pack in the other hand, aim at the guiding groove
on the body, slide in the battery pack according to the arrow direction shown in the picture. Pull
the battery pack after installation to make sure it does not get loose.
Attention: when the vacuum cleaner is long idled, please remove the battery, pack the product and store it in
a cool and dry place, avoid direct sunlight or humid environment.
Assemble metal tube and handheld vacuum
First, assemble floor head and metal tube according to the method of assembling electric floor
head and metal tube.
Electric floor
head
1 1
Charging holder
1 1
Screw
1 2
Electric mattress
Upholstery tool
head
1
Connector Stretch hose
1
Expansion pipe Instruction manual Accessory holder
2
1
2
crevice tool
1 1
Flexible metal tube
1 1
1 2
3
35