Installing The Gr2000-B On A Table Or Desk; Installing The Gr2000-1B, Gr2000-2B, And Gr2000-2B; Installing The Gr2000-Bh; Figure 4-1 Attaching The Rubber Feet - Hitachi GR2000-B Series Installation Manual

4.3

Installing the GR2000-B on a Table or Desk

You can install the GR2000-B on a stable and flat table or desk. Install the router
according to the following procedures.
4.3.1

Installing the GR2000-1B, GR2000-2B, and GR2000-2B+

Step 1. Place the router upside down on a flat, clean surface.
Step 2. As shown in Figure 4-1, attach the rubber feet to the 1.5 mm holes (4 holes
in all).
Attach Rubber Feet
to 1.5 mm holes (4)

Figure 4-1 Attaching the Rubber Feet

Step 3. Turn the router over and install it on a desk.
4.3.2

Installing the GR2000-BH

The GR2000-BH, already comes with rubber feet attached. Simply place the unit on
a table or desk.
GR2K-GA-0007
Rev. 5.00
Rubber Foot
Setup
4-3