Table of Contents
Advertisement
5.4.3.2
Installing a Power Supply Unit
Step 1.
Insert a power supply unit into the appropriate slot.
Power Supply
Slot 1
Figure 5-13 Inserting a Power Supply Unit
Step 2.
Insert a power unit all the way into the chassis until it stops and screw it
up.
Figure 5-14 Fastening a Power Supply Unit in Place
Caution:
!
Step 3.
Attach a power cable to a power unit as in Figure 5-11, above.
GR2K-GA-0007
Rev. 5.00
Power Supply
Screws
When using a screwdriver to fasten the BCU in place, be sure that the BCU is
fastened firmly in place.
Adding and Replacing Options
5-11
Advertisement
Table of Contents
