LAVAZZA blue CLASSY CUSTOM MILK LB1050 Instructions Manual page 54

EN
PREPARING THE MILK-BASED BEVERAGES
Press the CAPPUCCINO button
the preparation.
After a few seconds the machine will start to
warm and froth the milk.
The supply button will light up to a blinking
white light when the product is being supplied.
You can stop supplying by pressing the supply
button again.
Once the frothing cycle has been completed,
the machine will automatically supply the
amount of coffee in the jug.
The machine will emit an acoustic signal
indicate that the supplying phase is over.
Do not make more than 5 consecutive bev-
erages.
The machine will be ready to use again after
about 10 minutes.
Before taking the milk frothing jug off, wait
until the machine cycle is over and the milk
supplying buttons
steady white light.
Once supply is over, lift and then lower the
capsule loading lever to unload the exhausted
capsule.
Do not use the milk frothing jug to conserve
the beverages.
Always clean the jug thoroughly after each
use.
54
to start
to
come on to a
CAPPUCCINO LARGE SUPPLY
Open the milk frothing jug and fill it with milk up
to the CAPPUCCINO LARGE
(4.5 fl oz/130 cc).
Do step and
PUCCINO supply.
Press the CAPPUCCINO LARGE button
to start the preparation.
After a few seconds the machine will start to
warm and froth the milk
The supply button will light up to a blinking
white light when the product is being supplied.
You can stop supplying by pressing the supply
button again.
Once the frothing cycle has been completed,
the machine will automatically supply the
amount of coffee in the jug.
The machine will emit an acoustic signal
indicate that the supplying phase is over.
level sign
in paragraph CAP-
to