LAVAZZA blue CLASSY CUSTOM MILK LB1050 Instructions Manual page 56

EN
PREPARING THE MILK-BASED BEVERAGES
HOT FROTHED MILK SUPPLY
Open the milk frothing jug and fill it with milk
up to the MILK MACCHIATO/FROTHED
MILK level sign (6.1 fl oz/175 cc).
Close the milk frothing jug with its cover and
pay attention to the correct position and direc-
tion of the cover.
Fit the milk frothing jug into the machine; the
latter will emit an acoustic signal
cate that the jus has been inserted correctly.
Press the HOT FROTHED MILK button
to start the preparation.
After a few seconds, the machine will start
warming and frothing the milk.
The supply button will light up to a blinking
white light when the product is being supplied.
You can stop supplying by pressing the supply
button again.
The machine will emit an acoustic signal
indicate that the supplying phase is over.
Before taking the milk frothing jug off, wait
until the machine cycle is over and the milk
supplying buttons
a steady white light.
56
ACTIVATION AND SUPPLYING
Open the milk frothing jug and fill it with milk
up to the MILK MACCHIATO/FROTHED
MILK
to indi-
Close the milk frothing jug with its cover and
pay attention to the correct position and direc-
tion of the cover.
Fit the milk frothing jug into the machine; the
latter will emit an acoustic signal
cate that the jus has been inserted correctly.
Keep the TEMPERATURE Boost button
depressed over at least 3 seconds.
to
come on to
COLD FROTHED MILK
level sign (6.1 fl oz/175 cc).
3 sec.
to indi-