Preparing The Machine; Starting The Machine - LAVAZZA CLASSY PLUS Instructions Manual

EN
The manufacturer is not liable for damages
resulting from:
• incorrect use and / or improper use of the
machine;
• repairs performed by unauthorized Service
Centers;
• tampering with the power cord;
• tampering with any part of the machine;
• use of non-genuine spare parts and
accessories;
• no water softening;
• storage at a room temperature of less than
39.2°F (4°C);
• using the machine at a temperature of less
than 41°F (5°C);
• using the machine at a temperature of
more than 104°F (40°C);
• using non-compatible capsules.
In any of the above cases, the warranty will be
null and void.

STARTING THE MACHINE

Set the machine on a flat and firm surface,
far away from water or heat sources.
Do not connect the machine to the mains
supply. Any damage caused by the failure to
follow these instructions will make the war-
ranty null and void.
Rinse the tank before use. Fill the water tank
only with fresh, non-carbonated drinking water.
The cover can be lifted to fill the tank directly.
The water level should never exceed the
MAX reference mark and shall always be
above the MIN mark.
8

PREPARING THE MACHINE

Use non-carbonated fresh water only. Hot
water and other fluids can damage the tank.
Make sure that your hands, the machine, the
cord and the machine supporting surface are
not wet.
Insert the plug into the socket.
Press one of the switch-on/supply buttons to
switch the machine on.
The machine will be ready for use when the an-
imation is over and the supply buttons light up
to a steady white light.
Remove the milk frothing jug
chine.
When the milk frothing jug is not inserted, the
coffee dispensing icons will turn on only.
The milk dispensing icons will be disabled.
from the ma-