LAVAZZA blue CLASSY CUSTOM MILK LB1050 Instructions Manual page 53

PREPARING THE MILK-BASED BEVERAGES
CAPPUCCINO SUPPLY
Press the ON/STAND-BY button
activate the machine.
If the jug is inserted when the machine is set to
the Stand-by mode, the milk buttons will not
come on.
Open the milk frothing jug and fill it with milk
up to the CAPPUCCINO
oz/80 cc).
Pour the exact amount of milk indicated on
the jug.
Do not pour too much milk or too little milk.
Otherwise, hot milk may in both cases spill
out of the container.
Use only cold milk at the fridge temperature
(from 39 to 46 °F) (4-8°C).
Do not use milk at room temperature.
Using soy milk will not guarantee the best results.
Close the milk frothing jug with its cover and
pay attention to the correct position and direc-
tion of the cover.
to
level sign (2.8 fl
Fit the milk frothing jug into the machine; the
latter will emit an acoustic signal
cate that the jus has been inserted correctly.
Make sure that the milk frothing jug has
been fit into place correctly and, also, that
the milk-based beverage supplying buttons
come on to a steady white
light.
Lift the loading lever until it locks into position
to open the capsule fitting compartment.
Put a Lavazza
compartment
Lower the capsule loading lever.
Check that a capsule has been inserted. If
there is no capsule, the machine will delivery
water, not coffee.
EN
to indi-
capsule into the fitting
53