LAVAZZA blue CLASSY CUSTOM MILK LB1050 Instructions Manual page 48

EN
CAFFÈ LUNGO
Place the mug/cup as shown in chapter
PREPARATION FOR COFFEE
Lift the loading lever until it locks into position
to open the capsule fitting compartment.
Put a Lavazza
compartment.
Lower the capsule loading lever.
Press the CAFFÈ LUNGO
button to start delivery.
The supply button CAFFÈ LUNGO
will light up to a blinking white light when the
product is being supplied.
The machine will end the supplying when the
programmed coffee dose is reached, then it
will emit an acoustic signal
You can stop supplying by pressing the supply
button again.
Once supply is over, lift and then lower the
capsule loading lever to unload the exhausted
capsule.
To supply again, wait until the coffee buttons
and the ON/STAND-BY
button come on to a steady white light.
Supplying without a capsule the doses may not
respect the programmed quantity.
48
PREPARING THE COFFEE
SUPPLY
BREWING.
capsule into the fitting
(3 fl.oz/90 ml)
.
FREE DOSE BEVERAGE
Place the mug/cup as shown in chapter
PREPARATION FOR COFFEE BREWING.
Lift the loading lever until it locks into position
to open the capsule fitting compartment.
Put a Lavazza
compartment.
Lower the capsule loading lever.
Press the FREE DOSE beverage
150 cc) button to start delivery. The supply
button FREE DOSE beverage
up to a blinking white light when the product is
being supplied .
Once the desired amount of brewed coffee is
reached, press the button FREE DOSE bev-
erage again to stop supplying
Once supply is over, lift and then lower the
capsule loading lever to unload the exhausted
capsule.
To supply again, wait until the coffee supplying
buttons
BY
button will come on to a steady white
light.
SUPPLY
capsule into the fitting
(MAX
will light
and the ON/STAND-