Quality Measurement; Extremity; Description - Siemens Healthineers MAGNETOM Sempra Operator's Manual

4 Coils
Performing the measurement
Configuration
60
1 Align the laser light localizer with the center marking of the coil.
2 Correct the position of the coil if it is not possible to align the laser
light localizer with the center marking.
3 Start the measurement.

Quality measurement

4.9.3
✓ The Spine 18 is positioned on the patient table.
1 Place the Wrist 8 in the center on the patient table.
2 Connect the coil plug to coil sockets 1 or 2.
3 Open the upper part of the coil with the unlocking mechanism.
4 Position the Wrist 8 phantom so that it is held immobile.
5 Close the upper part of the coil.
6 Align the laser light localizer with the center marking of the coil.
7 Start the quality measurement.
assurance (software))
4.10

Extremity 12

Description

4.10.1
The Extremity 12 is used for examinations of the left and right knee.
The coil is used in the Feet First orientation.
Accessories (
The coil consists of the following components:
( Page 33 Performing quality
Page 77 Coil accessories)
Coils | Operator Manual
Print No. M4-08006G.623.01.02.02