Head/Neck; Description - Siemens Healthineers MAGNETOM Sempra Operator's Manual

Configuration
MAGNETOM Sempra
Print No. M4-08006G.623.01.02.02
2 Position the 5300 ml plastic bottle on phantom holder 29 so that
the bulge of the bottle is positioned as far as possible in the lower
part of the coil.
3 Place the upper part on the lower part of the coil and slide it
forward until it locks into place.
4 Align the laser light localizer with the corresponding center
marking of the coil.
5 Start the quality measurement.
assurance (software))
4.3

Head/Neck 10

4.3.1

Description

The Head/Neck 10 is used for examinations of the head and the neck
(e.g. nape of the neck and vessels of the neck), and combined
measurements with other coils.
A mirror carrier can be attached to the upper part of the coil.
Accessories ( Page 77 Coil accessories)
The coil consists of the following components:
Coils
( Page 33 Performing quality
4
41