Siemens Healthineers MAGNETOM Sempra Operator's Manual page 49

Positioning the coil
Securing the coil combination
MAGNETOM Sempra
Print No. M4-08006G.623.01.02.02
✓
The Spine 18 is positioned on the patient table.
✓ The lower part of the head/neck coil is positioned.
1 Position the patient in the supine position with the head toward
the magnet.
2 Use suitable positioning aids.
3 Position the Body 6 on the patient's pelvis and connect the coil to
socket 1 or 2.
4 Position the second Body 6 so that it overlaps the first and is lying
against its electronic boxes.
5 Slide the second iPAT cushion under the second Body 6 without
overlapping with the first iPAT cushion.
6 Connect the coil to the next open coil socket.
7 Secure the connection cable.
1 Slide the straps as shown through the flaps of the Body 6.
2 Secure both coils using the straps provided.
3 Secure the patient with an additional belt strap. Route the belt
strap over the overlapping area of the coil combination.
Coils 4
49