Quality Measurement - Siemens Healthineers MAGNETOM Sempra Operator's Manual

4 Coils
Performing the measurement
40
2 Move the lever to release the upper part of the coil and lift it up
and off.
3 Place the relax cushion in the lower part of the coil.
4 Secure the patient's head using the corresponding cushions.
5 Use suitable positioning aids.
6 Position the head of the patient in the lower part of the coil. Ensure
that the shoulders touch the lower part of the coil.
7 Place the upper part on the lower part and slide it forward until it
locks into place.

For cervical neck examinations, the upper part of the coil may be
omitted for slender patients.
1 Align the laser light localizer with the center of the region of
interest.
2 Start the measurement.
4.2.3

Quality measurement

The quality measurement for the Head/Neck 16 is performed in two
steps: for the head region and for the neck region.
✓ The lower part of the Head/Neck 16 is positioned on the patient
table.
1 Position phantom holder 29 into the lower part of the coil.
Coils | Operator Manual
Print No. M4-08006G.623.01.02.02