Siemens Healthineers MAGNETOM Sempra Operator's Manual page 48

4 Coils
Configuration
Safe handling
48
Accessories ( Page 77 Coil accessories)
The coil consists of the following components:
(1) Cluster 1
(2) Cluster 2
(3) Electronic boxes
(4) Coil plug
4.5.2 Use
In the following section, an examination of the entire upper body is
shown. Two Body 6 coils are used and the patient is positioned Head
First.
1 Always position the Body 6 so that the coil cable does not touch
the patient's head.
2 Use the iPAT cushion for a more homogeneous image contrast.
3 Do not bend the coil too much (for example, for ankle
examinations) as this may damage the coil. If you bend the coil,
ensure that the resulting diameter of bending is larger than
150 mm.
Coils | Operator Manual
Print No. M4-08006G.623.01.02.02