Table of Contents
Advertisement
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
4-cell battery (64 Wh)
4. Remove the
M.2 2230 solid-state drive
5. Remove the
wireless
card.
6. Remove the fan.
7. Remove the
coin-cell
8. Remove the
I/O
board.
9. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached.
10. Remove the
power button
11. Remove the
speaker
board.
12. Remove the speakers.
13. Remove the
display
assembly.
14. Remove the touchpad.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Steps
After performing the steps in the pre-requisites, you are left with the palm-rest and keyoard assembly.
Before working inside your
or the
6-cell battery (86
or the
M.2 2280 solid-state
battery.
or the
power button with fingerprint
computer.
Wh), whichever is applicable.
drive, whichever is applicable.
reader, whichever is applicable.
Removing and installing components
57
Hide quick links:
Advertisement
Table of Contents
