Dell Inspiron 16 7630 Service Manual page 49

About this task
The following images indicate the location of the speakers and provides a visual representation of the installation procedure.
Steps
1. Using the alignment posts, place the left and right speakers on the palm-rest and keyboard assembly.
2. Route the speaker cables through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cables to the connector on the system board.
4. Route the speaker-board cable through the routing guides on the palm-rest and keyboard assembly.
5. Connect the speaker-board cable to the connector on the speaker board.
6. Connect the speaker-board cable to the connector on the system board.
7. Connect the touchpad cable to the system board and close the latch.
8. Connect the keyboard cable to the system board and close the latch.
9. Connect the keyboard-backlight cable to the system board and close the latch.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Removing and installing components 49