Installing the speaker board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the speaker board and provides a visual representation of the installation
procedure.
Steps
1. Align the screw holes on the speaker board with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x1.8) that secure the speaker board to the palm-rest and keyboard assembly.
3. Connect the display-speaker cable to the speaker board.
4. Connect the speaker-board cable to the speaker board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following images indicate the location of the speakers and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
47