Dell Inspiron 16 7630 Service Manual page 35

Steps
1. Lift the latch and disconnect the display-board cable from the connector on the display board.
2. Peel the tape that secures the display-cable connector latch to the system board.
3. Lift the latch and disconnect the display cable from the connector on the system board.
4. Remove the two screws (M2x1.8) that secure the display board to the palm-rest and keyboard assembly.
5. Lift the latch and disconnect the display-board cable from the connector on the system board.
6. Disconnect the display-speaker cable from the speaker board and remove the display-speaker cable from the cable-routing
guides.
7. Open the display and place the computer on a clean and flat surface.
8. Remove the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard
assembly.
9. Remove the two screws (M2.5x5) and the screw (M2x4) that secure the right display hinge to the palm-rest and keyboard
assembly.
10. Gently lift the display assembly off the palm-rest and keyboard assembly.
Removing and installing components 35