Steps
1. Lift the latch and disconnect the touchpad cable from the system board.
2. Lift the latch and disconnect the touchpad cable from the touchpad.
3. Remove the five screws (M2x1.8) and the three screws (M1.6x2.5) that secure the touchpad to the palm-rest and keyboard
assembly.
4. Lift the touchpad off the palm-rest and keyboard assembly.
Installing the touchpad
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the touchpad and provides a visual representation of the installation procedure.
Removing and installing components
55