Power button with fingerprint reader
Removing the power button with fingerprint reader
Prerequisites
1. Follow the procedure in
Before working inside your
computer.
2. Remove the
base
cover.
About this task
NOTE:
This procedure applies only to computers shipped with a power button with fingerprint reader.
The following image(s) indicate the location of the power button with fingerprint reader and provides a visual representation of
the removal procedure.
Steps
1. Remove the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard
assembly.
2. Lift the palm-rest and keyboard assembly to lift the left display hinge from the palm-rest and keyboard assembly.
44
Removing and installing components