Steps
1. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x2) that secure the system board to the palm-rest and keyboard assembly.
3. Place the USB Type-C bracket on the system board.
4. Align the screw holes on the USB Type-C bracket to the screw holes on the system board.
5. Replace the two screws (M2x4) that secure the USB Type-C bracket to the system board.
6. Connect the keyboard-backlight cable to the system board and close the latch.
7. Connect the keyboard cable to the system board and close the latch.
Removing and installing components
53