Table of Contents
Advertisement
Steps
1. Place the I/O board on the palm-rest and keyboard assembly.
2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
4. Connect the I/O-board cable to the connector on the I/O board and close the latch.
5. Adhere the tape over the screw on the I/O board.
6. Connect the coin-cell battery to the connector on the I/O board.
7. Connect the I/O-board cable to the I/O board and close the latch.
8. Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the I/O board.
9. Replace the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard
assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
33
Hide quick links:
Advertisement
Table of Contents
